[BUGS2K]

So I called Two Bros racing today to ask if they were working on a juice box for the grom. The guy I spoke with said it should be on the way within the next 6 months or so and that they were just trying to finish up with their current project. He said they are working on a big bore kit that as of right now is showing an increase of around 50% hp That would take the bike from 9 to 13.5 without any other mods. This means 15 hp with exhaust and intake mods is very attainable. This should be available within a month or so according to employee i talked with today. He said keep a look out on the main page and in the grom section for updates!! CAN'T WAIT! Two Brothers made big bore coming soon!:big smile:

 

[BiG Chris]

I will wait on their stuff I wanna see what people think of it as I am not a fan of their products but if it works I will give it a try

 

[Powerbeast]

Two Brothers suck for performance!

 

[Jaygrom]

Two Brothers suck for performance!

I've never understood all the hate on Two Brothers products. I've used their exhausts on a few CBR600rrs and a CBR1000rr and it did everything an aftermarket exhaust is suppose to do; less weight, HP gains(dyno proven), nice sound, good quality, inexpensive and looks great. I get the impression that somebody heard from somebody that knows more about bikes say they didn't like Two Brothers so now that person has to try and sound knowledgable and regurgitate what he heard. Everybody else has jumped on the bandwagon. I've run everything from Akrapovic to Yoshimura to Two Brothers to Taylormade. Each one is unique and has different qualities. I'm currently running a Yoshimura on my Grom and a Taylormade on my CBR1000rr and I would have no problems using a Two Brothers for either.

 

[raz0rbladez909]

I'd be down to try it out. From everything I've seen, their stuff seems to be of good quality. Companies typically don't stick around for as long as they have building poor quality components. Until I have an issue with an actual product of theirs, I will withhold judgement.

 

[Grom'n-BR]

TBR...get rdy to cough up some coin on that kit dude
they are proud of their shit

 

[Strokd_GE]

13.5 seems optimistic without supporting mods, Snake put down a little under 13 with a 150, cam and oversized tb and thought 13s would've been achievable with a full aftermarket exhaust

 

[Powerbeast]

I've never understood all the hate on Two Brothers products. I've used their exhausts on a few CBR600rrs and a CBR1000rr and it did everything an aftermarket exhaust is suppose to do; less weight, HP gains(dyno proven), nice sound, good quality, inexpensive and looks great. I get the impression that somebody heard from somebody that knows more about bikes say they didn't like Two Brothers so now that person has to try and sound knowledgable and regurgitate what he heard. Everybody else has jumped on the bandwagon. I've run everything from Akrapovic to Yoshimura to Two Brothers to Taylormade. Each one is unique and has different qualities. I'm currently running a Yoshimura on my Grom and a Taylormade on my CBR1000rr and I would have no problems using a Two Brothers for either.

I have had multiple toys including a Can Am Spyder and Campagne T-Rex both with Two Brothers system and both actually lost power after install!
I like how they look and sounds but in pure aspect of performance they are no good!

 

[Kricu]

I have had multiple toys including a Can Am Spyder and Campagne T-Rex both with Two Brothers system and both actually lost power after install!
I like how they look and sounds but in pure aspect of performance they are no good!

I'd like to argue against that. I had a slip-on for my zx-6r and I definitely had some performance gain. No other mods were done and I could get my front tire to come up 5mph earlier than when I had my stock pipe. Doesn't sound like much but without a tune or anything, I gained some additional torque. I honestly wouldn't ever go with any other system. And if I had to bash a brand it would be yoshi.


Sent from my iPod touch using HondaGrom.net

 

[Scoobs]

I like choices, I don't see why a big bore kit from 2 bros will be a bad thing. We all have our faith on a few tuners, we don't have to like all the same stuff

 

[MotardCrazy]

http://www.twobros.com/cgi-bin/shopper?preadd=action&key=374-8-02

Noticed it posted on their site. 12 HP and comes with a fuel controller and cam shaft....interesting since the juicebox is usually made by Dynojet.

Edit: just noticed, its the Takegawa kit, its their e-stage. Stock photo thats on every other site

 

[RaZed1]

$450 for the entire kit really doesn't seem too bad if it's a solid setup. Follows that general rule of about $100 per hp, and looks to be totally plug and play.

 

[GromTactical]

That link pisses me off. Original post makes it sound like Two Bros is working on their own big bore kit in house. They finally list it on their site and it's a fucking Tagewa kit made in Japan. Three lines down it says Made in USA. Fuck that.

I'd be better off buying a used Yuminashi from King Kong Soap on eBay.


Sent from my iPhone using HondaGrom.net

 

[BAD ASS TA WS6]

Pricing seems high as I've been quoted/on the waiting list for the 181 Hyper S kit at $485. Can't beat Takegawa. I'm not sure what the deal is with the rebranding.

 

[AZGROM]

Looks like a re-badged Takegawa to me which is certainly not uncommon.

Edit: After reading the description that's exactly what it is haha. Funny it still says made in U.S.A.

 

[Sweendog]

"Takegawa kits come direct to us from Japan......Made in USA"


That makes a lot of sense.

 

[HardRacing]

Looks like a re-badged Takegawa to me which is certainly not uncommon.

Edit: After reading the description that's exactly what it is haha. Funny it still says made in U.S.A.

.

We just got off the phone with them.

Since we are selling this Kit, we needed to make sure they were not misleading the customers.

It's Definitely, NOT Made in the U.S.A.

They will be removing that from their Advert.

.

 

[GromTactical]

King Kong Soap 165cc full kit-- only $399 plus shipping.

Hecho en Saigon, USA


Sent from my iPhone using HondaGrom.net

 

[GromTactical]

.

We just got off the phone with them.

Since we are selling this Kit, we needed to make sure they were not misleading the customers.

It's Definitely, NOT Made in the U.S.A.

They will be removing that from their Advert.

.

Which of the two brothers did you talk to? Xin Xiang or Bryan?


Sent from my iPhone using HondaGrom.net

 

[MotardCrazy]

Ha!!! They have already raised the price on their site. Its now $499. Not the $449 it was listed for.