Honda Grom banner

Started the process to polish the spare swing arm, pic

1509 Views 4 Replies 4 Participants Last post by  CiscoSanJose
I went to HFT"Harbor Freight Tools" and picked up some buffing pads for my drill and also 6" polishing buffing pad for my grinding table top tool. I also picked up a Grey wax for cleaning and polishing the metal swing arm.

took some pic after about 1.5 hrs of drill polishing, I will start again tomorrow after I pick up more drill buffing pads.

I have to use some dermal tool for the tight spots
See less See more
1 - 1 of 5 Posts
do yourself a favor and get that chromed. polishing is a waste of time specially on a steel swing arm.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.