[roadster]

From a poor quality wiring diagram it looks like a white and green wire should be 12 volt. If its an ABS version it comes from the ABS controller for non-ABS from the instrument cluster. Pink wire carries the signal. Green wire is ground.

 

[roadster]

It’s the white and green that’s no longer getting power even though the ABS module seems to be working as it’s giving no faults on the dash.
All fuses have been triple check so not sure where to go now?
Thanks for the help 👍

I suggest you download the service manual from this forum. There is a complete diagnostic guide to the ABS system starting with the fuses of course but getting fairly complicated.