Honda Grom banner
1 - 20 of 50 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter · #1 ·
We thought we start our own. We just got our black one and have just started figuring stuff out with it. I think we're going to make it into a stunter/gymkhana bike. LOL!

Couple of preliminary notes. I think we're going to be blowing fork seals soon with the wheelies we are doing with it.

So far we've installed some rearsets and after some figuring out, they fit pretty nicely, albeit some bolts that were not supplied that we fortunately had in the shop. We have more on order now that we know how we can make them work. We will also be making an install guide (which was not included) which will make it easier for everyone who installs them after us. If you're reasonably mechanically inclined, it should take no more than an hour to remove the stock and install these. They come with passenger pegs and extensions but we took ours off. Should have them soon on our website for ordering. Forum members will get a special price for these. Available in black, red, silver, gold. The riding position is now much better, a little further back and a bit higher. 4 positions available.

Land vehicle Vehicle Tire Automotive tire Motor vehicle Vehicle Auto part Automotive tire Tire Motor vehicle Auto part Vehicle Tire Automotive tire Motor vehicle Vehicle Automotive tire Tire Motorcycle Auto part

We've also discovered that most of the Conventional Rizoma mirrors for naked bikes will fit on the bike with these adapters: (BS711)

In addition, any of the Rizoma turn signals will fit the Grom with fairing adapters FR201B

Glasses Glasses Technology Eyewear Electronic device Cable Electronic device Electronics accessory Technology Electrical connector Cable Technology Coaxial cable Electronic device Electronics accessory Technology Coaxial cable Electronic device Cable Electronics accessory Cable

We are working on a nice and clean tail tidy and will keep you all posted.

Next to figure out is which adapter works to remove the stock handlebars and install some Rizoma flat bars with risers.

Arrow full system will go on this weekend.
Honda MX 125 GROM Thunder Slip-On Exhaust by Arrow

We also have a braced swingarm and Ohlins shock on the way for testing.
 

·
Registered
Joined
·
44 Posts
Discussion Starter · #4 ·
Removed stock bars and installed Rizoma risers. The stock bars have such a rise to them and thee are not many bars out there like that. The Rizoma risers gain about 1.75'' rise. These are adapters for 29mm bars so most tapered or conical bars will fit. The riser bring the bars high enough to clear the tank with flatter conventional bars. In this case the Rizoma 22-29mm black conical bars.

Added Rizoma Sportline Grips.
 

Attachments

·
Registered
Joined
·
72 Posts
I bought some shorty levers from rideitmoto and they sent me those exact same grips you have on your Grom for free.
 

·
Registered
Joined
·
386 Posts
Motivation can you make it to Brenham Monday for a ride I'm driving up from Galveston. About a two hour drive for some rolling hills. Would like to see the bike and the Rizoma stuff. Would love some of the Rizoma goodies for my Brutale.

Thanks
 

·
Registered
Joined
·
44 Posts
Discussion Starter · #12 · (Edited)
Bf519 Looks like you're up for a good day riding. Weather shows promise. We're all going to be at the shop Monday but please come by if you have the time. Brenham is not far for a Brutale! :)

Arrow full system installed. Ti can with carbon end caps.
 

Attachments

·
Registered
Joined
·
386 Posts
Will drop by next time I'm up that way on the big bike. Monday will a day for the Grom.

Take Care
 
1 - 20 of 50 Posts
Top