Honda Grom banner
1 - 4 of 4 Posts

· Registered
Joined
·
51 Posts
Discussion Starter · #1 ·
Im installing the Rev 3 kit on my Grom and want to install the Motion Pro slim controls however the wiring has me a bit confused. Im gonna link a picture of a diagram i found from someone that did this install on an OG (i have a 2022 RR) as well as a picture of my motion pro wires and my stock wires. Motion pro has 8 wires and the stock has 5 (note that i cut the plug off the stock to solder onto the motion pro). I believe that according to his diagram he spliced 3 wires into one plug and left one wire out completely. Putting 3 wires to 1 plug doesnt sound correct to me though so was wondering if anyone has any insight on how to do this before i connect things that shouldnt be connected
Wood Creative arts Natural material Hardwood Wire
Wood Rectangle Art Font Display device
Finger Wood Gas Thumb Nickel
 

· Registered
Joined
·
51 Posts
Discussion Starter · #3 ·
Diagram too small to read in my browser.
My bad I didn't realize that you couldnt zoom or anything. I follow everything on it aside from the top right terminal where it looks like 3 wires are spliced into 1 terminal which would equal 7 wires which they mention the black and red wire they just left out. That's what im understanding from this but it doesn't sound right to me
Handwriting Rectangle Font Schematic Material property
 

· Registered
Joined
·
51 Posts
Discussion Starter · #5 ·
Just want to update everyone, my buddy is great at wiring and looked at it and told me to mimic the diagram that the guy made for his SF and it worked perfect. Hope this helps someone else out too
 
1 - 4 of 4 Posts
Top