MNNTHBX Fender Eliminator and Rizoma Front Signals

Challyfreel · Oct 20, 2013

I'm having a hard time wiring up these Rizoma blinkers along with my fender eliminator. I have tried every combination of the included Rizoma resistors and both the #552 flasher and also the CF12 flasher from superbrightleds.com has anyone else run this set up with this FEK and Rizoma front signals? I'm tired of guessing and checking

Sent from my iPhone using HondaGrom.net

yallknowme · Oct 20, 2013

Did you see the YouTube video that was posted yesterday for the FE install? Possibly wires are crossed.

banks619 · Oct 20, 2013

Challyfreel said:
I'm having a hard time wiring up these Rizoma blinkers along with my fender eliminator. I have tried every combination of the included Rizoma resistors and both the #552 flasher and also the CF12 flasher from superbrightleds.com has anyone else run this set up with this FEK and Rizoma front signals? I'm tired of guessing and checking

Sent from my iPhone using HondaGrom.net

What exactly is the problem? Just not flashing?

Sent from my iPhone using HondaGrom.net

Challyfreel · Oct 20, 2013

Yea I can't get them to flash. The only thing I get from them is a solid light when I'm using the #552 flasher and the blinkers connected direct with none of the included resistors

Sent from my iPhone using HondaGrom.net

banks619 · Oct 20, 2013

I would try an EL12 with 10w 3 ohm resistors

Sent from my iPhone using HondaGrom.net

Challyfreel · Oct 20, 2013

Thanks I'll try that tomorrow once I can get to radio shack

Sent from my iPhone using HondaGrom.net

Gremlin · Oct 20, 2013

I use this one. No issue at all. Fast shipping to. Plus you use the little factory rubber mount and fits perfect.

http://bit.ly/19iXzNb

Sent from my iPhone using HondaGrom.net mobile app

banks619 · Oct 20, 2013

Gremlin said:
I use this one. No issue at all. Fast shipping to. Plus you use the little factory rubber mount and fits perfect.

http://bit.ly/19iXzNb

Sent from my iPhone using HondaGrom.net mobile app

It works with both front and rear LED's? If so that's pretty damn good.

Sent from my iPhone using HondaGrom.net

MNNTHBX · Oct 20, 2013

I run it obviously, and Rizomas up front. No hokie resistors needed. This unit works perfect. Custom LED Electronic Motorcycle Blinker Flasher Relay - Tobefast Of note, if you wire it like common sense would tell you, black to black, it's backwards, and won't flash.

banks619 · Oct 20, 2013

MNNTHBX said:
I run it obviously, and Rizomas up front. No hokie resistors needed. This unit works perfect. Custom LED Electronic Motorcycle Blinker Flasher Relay - Tobefast Of note, if you wire it like common sense would tell you, black to black, it's backwards, and won't flash.

Thanks for the info.

Sent from my iPhone using HondaGrom.net

Challyfreel · Oct 20, 2013

Thanks guys, I'm gonna try those flashers next.

Sent from my iPhone using HondaGrom.net

justin146 · Oct 20, 2013

Why not run an electrical flasher instead of a thermal? No worries about resistors and such with one of them. A 232 flasher will flash correctly no matter how little the load is. And it plugs in just like a 2 post thermal flasher. I dont use one on my Grom, but have one running LEDs on my CX500.

banks619 · Oct 20, 2013

The EL12 is an electronic flasher so it should work with both LEDs front and rear but I have never tried it.

Sent from my iPhone using HondaGrom.net

vdub2012 · Oct 20, 2013

MNNTHBX said:
I run it obviously, and Rizomas up front. No hokie resistors needed. This unit works perfect. Custom LED Electronic Motorcycle Blinker Flasher Relay - Tobefast Of note, if you wire it like common sense would tell you, black to black, it's backwards, and won't flash.

Will the front turn signals still work as running lights with this?

Gremlin · Oct 20, 2013

banks619 said:
It works with both front and rear LED's? If so that's pretty damn good.

Sent from my iPhone using HondaGrom.net

Yep! Works for both. Seems just as good as the other relays, which I just so happen to have also. This just fits nice.

Sent from my iPhone using HondaGrom.net mobile app

MNNTHBX · Oct 20, 2013

The Rizomas won't serve as running lights, as they're 2 wire instead of three. Has nothing to do with the flasher.

vdub2012 said:
Will the front turn signals still work as running lights with this?

Challyfreel · Oct 21, 2013

Gremlin said:
I use this one. No issue at all. Fast shipping to. Plus you use the little factory rubber mount and fits perfect.

http://bit.ly/19iXzNb

Sent from my iPhone using HondaGrom.net mobile app

It says the listing has ended. Do you know anywhere else to find them? And are these plug and play? Or is splicing required?

Sent from my iPhone using HondaGrom.net

Gremlin · Oct 21, 2013

Challyfreel said:
It says the listing has ended. Do you know anywhere else to find them? And are these plug and play? Or is splicing required?

Sent from my iPhone using HondaGrom.net

No splicing required. Yep plug n play. i just removed the connector it came with and used the stock one. I know he has a bunch.
Try this link: http://bit.ly/1axXp2o

Sent from my iPhone using HondaGrom.net mobile app

Challyfreel · Oct 21, 2013

Gremlin said:
No splicing required. Yep plug n play. i just removed the connector just the stock. I know he has a bunch.
Try this link: http://bit.ly/1axXp2o

Sent from my iPhone using HondaGrom.net mobile app

Ordered. Thanks, now just to see if it works

Sent from my iPhone using HondaGrom.net

Gremlin · Oct 21, 2013

Challyfreel said:
Ordered. Thanks, now just to see if it works

Sent from my iPhone using HondaGrom.net

I hope so too. He designed them for the grom so...just PM if you have any questions on install. It's pretty simple and I'm new to this. If it doesn't work maybe re check and go through the wires? I'm confident it should ?

Sent from my iPhone using HondaGrom.net mobile app

MNNTHBX Fender Eliminator and Rizoma Front Signals

Top Contributors this Month