Honda Grom banner

1 - 20 of 202 Posts

·
Registered
Joined
·
942 Posts
Discussion Starter #1
i hate waiting, so i find stuff i know guarentee i will need/use. this is what i ordered so far in order
msxheadlight1-801c26e7.jpg speed-and-strength-ss2500-motorcycle-helmet-review-2.jpg

Pro Taper ProTaper Contour Handlebar RC Ricky Carmichael Bend Mount Kit Grips | eBay

still need to find a place to order my belly pan/under cowl and windscreen.

headlight is from tyga-performance.com still waiting to come in from thailand, shipping was $60 and they use paypal.
helmet is from motorcycle-superstore.com
bar kit is ebay, everyone should know ebay by now... lol
 

·
Registered
Joined
·
257 Posts
I have only ordered mirrors thus far but here is my to-do list...

1st week
- Remove all warning stickers
- Remove seat strap
- Remove front and rear reflectors
- Battery Tender adapter
- Replace mirrors
- Sculpt the stock seat or replace with a new one
- Fender eliminator kit
- LED signals front and rear
- Fuel controller
- Full pipe (low, single)

2nd month
- suspension?
- bars/risers?

3rd month
- keep browsing this forum to get more ideas, lol
 

·
Registered
Joined
·
942 Posts
Discussion Starter #3
I have only ordered mirrors thus far but here is my to-do list...

1st week
- Remove all warning stickers
- Remove seat strap
- Remove front and rear reflectors
- Battery Tender adapter
- Replace mirrors
- Sculpt the stock seat or replace with a new one
- Fender eliminator kit
- LED signals front and rear
- Fuel controller
- Full pipe (low, single)

2nd month
- suspension?
- bars/risers?

3rd month
- keep browsing this forum to get more ideas, lol
what do the mirrors look like and where did you order it from?
 

·
Registered
Joined
·
257 Posts
what do the mirrors look like and where did you order it from?
Got these off eBay...


2" tall x 5.5" wide

They were cheap so if they don't look how I want on the Grom I may try em on my CRF or just put em in the spares bin.
 

·
Registered
Joined
·
67 Posts
headlight is from tyga-performance.com still waiting to come in from thailand, shipping was $60 and they use paypal.
curious if the tyga part is OEM, aftermarket bulit like OEM, or just their design. If you could shed some light on that, as well as shipping time from Thailand that would be much appreciated.

-Chad
 

·
Registered
Joined
·
942 Posts
Discussion Starter #12
curious if the tyga part is OEM, aftermarket bulit like OEM, or just their design. If you could shed some light on that, as well as shipping time from Thailand that would be much appreciated.

-Chad
Well on the site the light is in the oem honda section, on the image it has honda labeling. So I just assumme its oem. But I ordered it cause I believe the U.S. Model doesn't come with a projector light. An well even though it might be oem in thailand, I'm pretty sure it won't have a dot stamped on it, idk I may be wrong. So if the safety check station checks he could be a dick an fail me. That's how it is in hawaii anyway.

Haven't gotton it in yet. Will post when I get it.
 

·
Registered
Joined
·
942 Posts
Discussion Starter #14
curious if the tyga part is OEM, aftermarket bulit like OEM, or just their design. If you could shed some light on that, as well as shipping time from Thailand that would be much appreciated.

-Chad
Oh an I just checked my emails, I ordered it on 5/21, it was processed an ready to ship out 5/23. Tracking still says outgoing international on the status when I checked this morning.
 

·
Registered
Joined
·
257 Posts

·
Registered
Joined
·
4,049 Posts
Slolane you ROCK. I agree those should work with three different adapters. I was looking at another set with a carbon fiber look to them but I think I like these better.
 

·
Registered
Joined
·
257 Posts
Glad to help man, I figured that these mirrors were cheap enough to pull the trigger on.

I just couldn't stand the look of the stock mirrors and huge license plate contraption... so mirrors are now good, as for the fender I will get out my Dremel and fix that until I figure out how to bolt up something else or some FEK's start coming out.

I will post details for all my mods with pics, links, etc. I don't plan to do too much, mostly simple bolt on stuff but it really helps to share.
 

·
Registered
Joined
·
4,049 Posts
Yes I am with you. I also noticed that the mirrors on the new CB500F look pretty good and will probably be a straight bolt on - CB500F and Grom are both built in the same factory. I plan on using the dremel to modify that tail also. I saw one with just the top portion left on and all the stuff that then hangs down removed. It added length to the back of the bike but still looked good.
 
1 - 20 of 202 Posts
Top