Honda Grom banner

21 - 31 of 31 Posts

·
Registered
Joined
·
7 Posts
Can some one please tell me where the VIN is located on the grom?
I know your question is a little old, but its on the steering stem/ aka under where the handle bars attach.
The PDF on the first page of this topic shows right where it is on page 94.
 

·
Registered
Joined
·
334 Posts
A little more info I obtained - Intake Clearance = 0.1mm +-0.02mm @ 2.5k
Exhaust Clearance = 0.17mm+-0.02mm @ 2.5k
Oil = 10w30 @ 2.5k
Oil strainer & filter = Clean @ 7.5k
Spark plug = NGK: cpr6ea-9, DENSO: u20epr9. Gap 0.8-0.9mm, Torque 16Nm/12f.tlb. This was obtained of a guy from his local dealer, apparently service manual is not available on p.d.f as yet and info only available on Hondas database, so dealer has kindly printed this info off and has told him if he wants more he will print some off soon for him, al keep ya updated as and when I get more info!
I should get ready to do the valve clearence then....so every 2.500km, seems a lot of adjusting
 

·
Super Moderator
Joined
·
87 Posts
wheres the usa manual?
Right here... (I tried to upload the .PDF directly, but the forum wouldn't let me.)

https://www.dropbox.com/s/68c8i48vjgd29am/2019 Grom125-A.pdf?dl=0

This is for the 2019, but should cover the 2017-2020.

Valve clearance inspections are now every 4,000 miles instead of 600 miles and every 2,500 miles.

Oil changes are now at 600 miles and every 4,000 miles instead of 600 miles and every 2,500 miles.

Spark plug is now every 8,000 miles instead of every 5,000 miles.

UPDATE: Owner's Manuals can now be downloaded from the link below.

https://powersports.honda.com/downloads/owners-manuals
 
21 - 31 of 31 Posts
Top