Honda Grom banner

1 - 20 of 22 Posts

·
Registered
Joined
·
3,744 Posts
Discussion Starter #1 (Edited)
FS: Power commander & WB2 combo, Kitaco clutch cover and scrambler exhaust

Set up for a BBK, 4V 4 gear maps loaded.

target afr on WB2 is 13.0. rev extend set to 11.5k.

sold as pair, ready to bolt on. was on '14

both as pair: 365.00 shipped conus. Or, 350, and you pay actual shipping. (retail on HR for pair is 568. pre shipping) will not ship overseas, don't ask.

will not split pair up, price is firm.

Unit was bought from Hard Racing back in '15. will include manuals, etc (have all that at home) can ship in 1 or 2 days as i have to dig that stuff out of boxes.

No cut wires, no hackery, but stuff is used. worked beautifully.

Going motor swap, do not need this any more.


added:

kitaco clutch cover. as seen in picture. + extra filter element 175.00. never dropped or crashed. sold!~




scrambler exhaust, one off, tig welded and back purged, all stainless steel mandrel bent pipe. *will only work with aftermarket rearsets . VERY loud, works very well. will need to open exhaust port on head a bit. Has cone engineering muffler (alone was over 140). asking 165.00. has O2 bung welded in to sit above cylinder., spaced correctly out to not impede flow. 31mm id at headpipe.

all shipped to continental us only.


pm for paypal info or any q's

added pics:

grompart2_1.jpg



grompart2_2.jpg

grompart2_3.jpg
 

·
Registered
Joined
·
3,744 Posts
Discussion Starter #4
Oh, forgot to add. Have dynojet afr gauge, opmid oil temp gauge, and mount. will throw in pcv/wb2 setup for an additional $100.
 

·
Registered
Joined
·
3,744 Posts
Discussion Starter #6
Im putting a 250cc 2 stroke motor in the grom. I broke the rod so all the 4 stroke stuff is going away. I don't need it anymore.
 

·
Registered
Joined
·
278 Posts
Is this from the bike you ran with the Yuminashi ecu? I have mine but have yet to plug it in. The no rev limiter has me second guessing.
 

·
Registered
Joined
·
3,744 Posts
Discussion Starter #9
same bike but also had the pcv on it, and the revlimiter did work on the pcv. stock rod, 5 years of beating to death. It just gave up. my own fault for running a stock bottom end that hard. f-it. its getting a 250 2 stroke motor.




I forgot, I also have a takegawa slipper clutch under that cover.

85 shipped. :encouragement:
 

·
Registered
Joined
·
673 Posts

·
Registered
Joined
·
3,744 Posts
Discussion Starter #15
yup. clutch: sold.

still up for grabs: headlight ears and power commander set up and exhaust.
 

·
Registered
Joined
·
856 Posts
Thanks for the Kitaco cover. :) I didn't notice you had dropped the price on it but I'm totally happy. It's a perfectly fair deal for what I paid for it.
 
1 - 20 of 22 Posts
Top