[MSX125]

Hey guys,

I dont know how the weather is over there but here i feel like spring is coming..
Anyway my question is simple, is there a good way to clean the engine, so it will be as shiny as new?

I tried a toothbrush but it wont fit in between the cooling fins..

I could not find anything on here yet, unless I've looked across it..

Thanks in advance!

 

[hicksy712]

Maybe do a test spot somewhere first as I don't know how it would do on the paint... (Wouldn't think it'd cause harm, but I don't wanna be the reason your motor turned purple) But on my dirt bikes I sometimes use Scrubbing Bubbles bathroom cleaner. The foaming action does pretty good clearing mud from hard spots.

 

[Grom1202]

After washing it and let it dry . Spray the motor down with some wd40 ,it will look like new...

Braap

 

[CiscoSanJose]

After washing it and let it dry . Spray the motor down with some wd40 ,it will look like new...

Braap

Yep WD-40 does wonders, use it on my jet ski, Harleys, Hayabusa and any of my motor vehicle engines

tooth brush, dermal down the sides of the tooth brush to get the size you need to fit between the Grom engine fins or get a old paint brush that can fit between the fins and cut the brush bristles short to make it stiff so it will act like a brush to scrub in between the fins.

Good luck

 

[rkwfxd]

I use armor all. Wash bike spritz withAA let dry.

Bikes always look good IMO.

Once they get dirty again the AA and dirt Hosea right off.


Sent from my iPhone using HondaGrom.net

 

[MSX125]

alright thanks already guys, I have WD-40, never used it for cleaning purposes, I'll try it out asap!

 

[Dregali91]

I use windex