Honda Grom banner

BARS, BARS, BARS, BARS, Comparison, Installation, Video and Review

4K views 8 replies 6 participants last post by  HardRacing 
#1 ·
We have been getting a lot of calls and questions for bars.

What Size Can I go with ?
How low can I go ?
Will I have clearance issues ?
What do I have to do, to switch to Oversized bars ?

Of course, there are hundreds of bar options.
We can't showcase them all.

But, what we wanted to do was at least show some of the more popular options and sizes, and video the writeup.
Just to help anyone on the fence, they don't have to go out and buy 4 or 5 sets of bars to find the one they like.

So we are comparing 5 different bars with a range of sizes.

While you may want a different brand, or color, this information should at least help guide you as a reference on Sizes.
Most importantly, Bar RISE, and Overall Bar Height.
Once you watch the Video's it should explain more.


Please keep in mind, these Video's are just to show you installation process, and bar comparison.
Doing Videos is NOT our thing. But, we are trying.
We are not Steven Spielberg. So bare with our Poor Editing Skills. We just wanted to get the information out there for everyone.

We had no idea how much BS goes into making one of these videos even remotely watchable. :sorry:






.






.
 
See less See more
2 1
#2 ·
REFENCE CHART:


GROM BARS Featured


………………….A (Wide)…. B(Height)..C(Rise)… D(Clamp)..E(Sweep)..F (Grip)
CR HONDA BK……802A…….99B…..….65C……...105D…...54E……....188 F
REED / WIND Ti…...803A…….92B…..….56C……...100D…... 57E….…..187F

RC HIGH RED….....802A…….119B….... 80C……...105D…...54E….…...190F
ROAD HIGH Silver..710A…….120B…...105C……..105D…...105E….…..200F

STOCK BARS Apprx... A700W ….220B … 140C…. 120D……65E….. 200 F

.
 
#5 · (Edited)
Took some snap shots from the Video's trying to get the same position for each. Or at least best possible.











.
 
#9 ·
.
No problem.

Glad you enjoyed it.

.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top