Thanks for all the comments
Type: Posts; User: Dariusz
Thanks for all the comments
Hi, I'm not sure if someone try this, but is any drawback (handling, clearance, etc) putting a 130-80 in the front of the Monkey?
I have the same set in the carrier now. How well is the color match?
Thanks a lot CiscoSanJose
Where can be purchased? I can't find it as looks are out off stock every where :(
People, sorry to revive this post, but any place to find this? drowsports.com out of stock and don't have a date to receive/have more https://www.hondagrom.net/forums/images/smilies/frown.png...
Thinking a little more, what happens to the old oil in the oil cooler at the moment of a oil change? As the old oil don't drain to the carter then remains in the cooler and mix with the fresh one....
Make a lot of sense, I don't thing about that. Whit that in mind, a check valve is not needed.
I don't have one so is not easy Ha Ha Ha, but is fine, I'm used to the hard dry clutch of the ducati monster or the triumph scrambler, so it must be ok, thank you
Agree that is not easy, is only a "thumb rule" question to have a idea what expect, thank you
I see that most of the Oil Coolers people have are in a position that is much higher than the engine, so the oil must rise and then lower.
What happens when the engine shuts down (the oil pump...
I'm curious, in a scale from 1 to 10 where 1 are the regular springs, how much "effort" is needed at the the lever with 30% or 60% springs? I guess it's not linear
Sounds as a action course...
20 can be too much in general. A heavy oil can looks as good choice but the extra pressure starts to damage the seals very easy and change seals is start again from zero. In example Ohlins I think...
If it is 15mm and no 14mm, don't have some "play"?
My question comes as in the JT web side (JT Sprockets: Catalogue) talk about the JT249 but in most places where sales sprockets offer the JTF252. Both looks identical but I find that the JT249 is...
Hi people, for a Monkey, street use (hooligan driving style) the Ohlins FDK107 Fork Kit (compression and rebound graduation) is a overkill and is enough av good set of 68000-04 (or 05) Ohlins Fork...
Nice, similar to my story, I'm 51 YO and my first bike is a RM 80 at 12 age.
The correct and best color for a Monkey ;)
Hi people, I can find a lot of info about how to reset and clear codes in a Grom ECU and TPS, but for the Monkey I'm not sure if the process (and wires colors, etc) is the same? Anyone can confirm?
CiscoSanJose, what is the test result? Any good or you lost to much power?
I'm not sure but reading all the comments, for me all (Kitaco, Takegawa, ect) looks same, if it have 2 upside ports, 1 breather and 1 downside port works. Or I'm don't see something important?
Thanks for the answer, and yes, I know that sensation Ha Ha Ha, is addictive
I ask about the return, as is in the product description (in the HR web site):
RELEASE PRESSURE INSIDE THE CASE TO PREVENT POWER LOSS.
ALSO KEEP BEST TEMPERATURE INSIDE THE CASE...
Hi people, any of you open or have a idea how the Kitaco or the Takegawa Oil Catch Cans works internally?
I ask as the regular ones we can find on e-bay or amazon for $25 collects the oil and...