^Link for anyone interested.
This is a discussion on anyone used TBolt USA 186 big bore cylinder on their grom within the Grom Talk forums, part of the Honda Grom Forums category; I was looking into doing some changes to my Finbro 183 grom and do some mix matching of cylinder and heads and cam for my ...
I was looking into doing some changes to my Finbro 183 grom and do some mix matching of cylinder and heads and cam for my next project once I get my Takegawa 181-4v broken in.
I was wondering if anyone used TBolt USA parts since their selling points on their cylinder wereCeramic coated all aluminum cylinder.
Anyone used them with any luck????
I'm using that one, quality sure didn't seem like an issue. I have the finblo bbk head with it and no problems. Only about 50 miles on due to fueling concerns and lack of time.
did you have to cut reliefs in the piston for the intake or exhaust valve?
I like TBolt cylinder materials that they use for their cylinder wall and how much better the cylinder is for cooling.
My setup will be to use the BrianS 170 ported head on my build and going back to the Finbro ported intake pipe and stock throttle body using the PC-150 f/i and the duel spring setup with DCR cam.
I was having great power with the BrianS 170 kit and I believe his ported head for a 2v system was the best on the market.
Last edited by CiscoSanJose; 05-24-2017 at 04:42 PM.
T Bolt helped me a lot when I was racing Mini SX. Never had a problem using there goods. Give them a call Vince is very helpful.
2014 MV Agusta Brutale 1090RR Pearl White
87 Honda VFR 700 Pearl White
88 Honda ZB 50 Takegawa 115 Kit 5 Speed
03 Honda XR50 Kitaco 88cc Kit
69 Mini Trail 50
83 Blue ATC 70 w/Powroll 83cc Kit
1976 Yamaha RD400C
Toys are good
TBolt is a great company....I use them for all my SSR stuff and bought a 150 motor off them that has been killer