Honda Grom Forum

DubSolo's re-BUILD and other shit...

Thread: DubSolo's re-BUILD and other shit...

Tags: None
  1. dubSolo's Avatar

    dubSolo said:

    dubSolo's re-BUILD and other shit...

    Regretted not doing a Build thread, cracked my frame about two months ago... Nows my chance.

    Making some changes as she is put back together, Starting with but Not limited to.

    Kepspeed Aluminum Swingarm w/needle bearings
    Galfer Rotors and Vortex 36t rear sprocket
    Raw Aluminum tappet covers by TRS
    GFz Custom Hindle Header Gasket
    Shorai LFX09L2-BS12 Battery

    Pics of before she Broke and of her current condition...
    Attached Thumbnails Attached Thumbnails
    Last edited by dubSolo; Yesterday at 08:35 PM.
    Super!Stock 2018 DSR Honda Grom

    Dhm Custom Hi Comp Piston
    Dhm Race Ported Cylinder Hd
    Dhm Velocity Intake Dcr2 Cam
    Hindle Exhaust Stock Ported TB
    Lightend Flywheel and Oil spinner
    Takgawa Crank Support 4th Bearing
    Takgawa Hi Ign Coil w/NGK Race Cable
    Takgawa Hi Flw Oil Pump w/Opmid Gauge
    EBC Srk122 kit Billet plate w/SMR Springs
    EBC Brake Pads w/ Wave Rotors
    SpeedLinez Brake Lines w/Short Levers
    Ohlin Fork Springs, Ohlin HO 424 Rear Shock
    GF Billet Vented Cam Cover and Speed Spacers
     
  2. phillybuilt's Avatar

    phillybuilt said:
    Dat swingarm doe....

    Look at that centerfold Grom

    Sent from my SAMSUNG-SM-G935A using Tapatalk
     
  3. CDN Grom said:
    I plan to get one of those swingarms, but in silver...

    Where did you purchase yours?
    2015 OG Grom in Yellow - AODRacing loop exhaust, ContiScoot tires, EBC HH front pads, RideItMoto levers, Renthal kevlar grips, Road low bars, CJR ECU, TB cam, MNNTHBX Mtake, Outerwears, Koso temp gauge, short shift linkage, TST sliders, Aliexpress tail tidy, Aliexpress axle sliders

    Pending - oil cooler, CoreMoto braided lines, high mount exhaust, rearsets and GP shift conversion
     
  4. Remove Advertisements
    HondaGrom.net
    Advertisements
     

  5. dubSolo's Avatar

    dubSolo said:
    Quote Originally Posted by phillybuilt View Post
    Dat swingarm doe....

    Look at that centerfold Grom
    Hold Up homii... Dats my lady you talkin bout! lol

    Quote Originally Posted by CDN Grom View Post
    I plan to get one of those swingarms, but in silver...

    Where did you purchase yours?
    Member WV rocks a silver one, On his recomendation is how I came across this.

    https://www.motorkit.com/en/9205-swingarms-for-honda-msx-grom-?p=1
     
  6. OpusNectar's Avatar

    OpusNectar said:
    Looking good Dub! I'm also changing my rear sprocket to 36T, seems like I can never get enough torque with the 4V.

    I went with BRAKING rotors instead, they were about 1/2 the price of Galfers.
    2015 Grom
    Koso 4V | Aracer AF1, DG1, MiniPlus2 | Kitaco Crank | Takegawa 5 Speed
    Kitaco CCT | Takegawa Oil Pump & 4th bearing | GF Billet Cam Cover
    34mm TB | Motion Pro Rev2 | Protaper CR High | Renthal Clamps
    Kitaco Clutch Cover (vented) & Oil Cooler | GF Speed Spacers
    Brembo 4P & P34 Calipers | BRAKING Rotors | Galfer SS Lines
    Driven TT Rearsets | OTB V2 Adjusters | MNNTHBX Swingarm Bushings
    RacingBrothers Sus. | Hindle High Mount
    Saddlemen Seat | 428 conversion 15/36 | Mitas MC35S 100/120
     
  7. CDN Grom said:
    Quote Originally Posted by dubSolo View Post
    Hold Up homii... Dats my lady you talkin bout! lol



    Member WV rocks a silver one, On his recomendation is how I came across this.

    https://www.motorkit.com/en/9205-swingarms-for-honda-msx-grom-?p=1
    Yah, same place I plan to order from as well.
    2015 OG Grom in Yellow - AODRacing loop exhaust, ContiScoot tires, EBC HH front pads, RideItMoto levers, Renthal kevlar grips, Road low bars, CJR ECU, TB cam, MNNTHBX Mtake, Outerwears, Koso temp gauge, short shift linkage, TST sliders, Aliexpress tail tidy, Aliexpress axle sliders

    Pending - oil cooler, CoreMoto braided lines, high mount exhaust, rearsets and GP shift conversion
     
  8. dubSolo's Avatar

    dubSolo said:
    Quote Originally Posted by OpusNectar View Post
    Looking good Dub! I'm also changing my rear sprocket to 36T, seems like I can never get enough torque with the 4V.

    I went with BRAKING rotors instead, they were about 1/2 the price of Galfers.
    Thank you sirrr!

    Thats the biggest problem I have, once I get use to any gains or positive difference's... Leads to wanting more. Using 36t for around town and curves otherwise its the 35t for top speed.

    You right on the Galfers not cheap, I got lucky though found these on facebook group $60 for the set with low miles, not warped and no brake pad grooves.

    Rubbed them down with a 600 grit sanding block, Like New!

    I like the look of the Galfers and Braking brand, they look like less rotor/metal as the EBC waves Im running now.
     
  9. OpusNectar's Avatar

    OpusNectar said:
    Quote Originally Posted by dubSolo View Post
    Thank you sirrr!

    Thats the biggest problem I have, once I get use to any gains or positive difference's... Leads to wanting more. Using 36t for around town and curves otherwise its the 35t for top speed.

    You right on the Galfers not cheap, I got lucky though found these on facebook group $60 for the set with low miles, not warped and no brake pad grooves.

    Rubbed them down with a 600 grit sanding block, Like New!

    I like the look of the Galfers and Braking brand, they look like less rotor/metal as the EBC waves Im running now.
    I agree. I was running EBC Vee rotors and hated the look after a while. Seems like a lot of unnecessary material.
    2015 Grom
    Koso 4V | Aracer AF1, DG1, MiniPlus2 | Kitaco Crank | Takegawa 5 Speed
    Kitaco CCT | Takegawa Oil Pump & 4th bearing | GF Billet Cam Cover
    34mm TB | Motion Pro Rev2 | Protaper CR High | Renthal Clamps
    Kitaco Clutch Cover (vented) & Oil Cooler | GF Speed Spacers
    Brembo 4P & P34 Calipers | BRAKING Rotors | Galfer SS Lines
    Driven TT Rearsets | OTB V2 Adjusters | MNNTHBX Swingarm Bushings
    RacingBrothers Sus. | Hindle High Mount
    Saddlemen Seat | 428 conversion 15/36 | Mitas MC35S 100/120
     
  10. OpusNectar's Avatar

    OpusNectar said:
    PS I got one of those Hindle gaskets too...

    Reminds me of when I was having that leaky head...would've given my left nut for this thing back then....
    2015 Grom
    Koso 4V | Aracer AF1, DG1, MiniPlus2 | Kitaco Crank | Takegawa 5 Speed
    Kitaco CCT | Takegawa Oil Pump & 4th bearing | GF Billet Cam Cover
    34mm TB | Motion Pro Rev2 | Protaper CR High | Renthal Clamps
    Kitaco Clutch Cover (vented) & Oil Cooler | GF Speed Spacers
    Brembo 4P & P34 Calipers | BRAKING Rotors | Galfer SS Lines
    Driven TT Rearsets | OTB V2 Adjusters | MNNTHBX Swingarm Bushings
    RacingBrothers Sus. | Hindle High Mount
    Saddlemen Seat | 428 conversion 15/36 | Mitas MC35S 100/120
     
  11. CDN Grom said:
    Thanksb to be home in a couple hours juuuhu







    Ok
    ;!(;;+!()9889-!9

    8
    2015 OG Grom in Yellow - AODRacing loop exhaust, ContiScoot tires, EBC HH front pads, RideItMoto levers, Renthal kevlar grips, Road low bars, CJR ECU, TB cam, MNNTHBX Mtake, Outerwears, Koso temp gauge, short shift linkage, TST sliders, Aliexpress tail tidy, Aliexpress axle sliders

    Pending - oil cooler, CoreMoto braided lines, high mount exhaust, rearsets and GP shift conversion