fuel controller advice
Close
Login to Your Account
Honda Grom Forum

fuel controller advice

This is a discussion on fuel controller advice within the Grom Talk forums, part of the Honda Grom Forums category; Ive been researching the forum for weeks and have not found a comfortable solution to my problem. I would like to max out the potential ...

Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 40
Like Tree7Likes

Thread: fuel controller advice

  1. #1
    Junior Member
    This user has no status.
     

    Member #
    6739
    Join Date
    Dec 2015
    Posts
    5

    fuel controller advice

    Ive been researching the forum for weeks and have not found a comfortable solution to my problem. I would like to max out the potential with the stock bore. I already have a Two brothers exhaust, and chimera intake. In the near future I will be adding a Yoshimura performance cam and Finbro 125 upgraded head. The problem I have is the lack of resource to have the 02 bung welded into my exhaust otherwise PCV and WB2 would be the way to go from reading the forum. Also I've noticed the limited maps available for the bazzaz and ejk on their website and none listing the needs for my particular mods. AFR+ seems the way to go (exhaust bung not needed) but I've seen a few issues with the 02 sensor being installed in the stock location causing it to fail.
    So my question what would be the best fuel controller to suit my needs:
    2015 grom
    exhaust
    intake
    Cam
    port and polished head
    Absolutely no plan to upgrade to BBK.

  2. #2
    Senior Member
    is bbk woohoo!
     
    humilde_s13's Avatar
    Member #
    1400
    Join Date
    Sep 2013
    Location
    Virginia
    Odometer
    13500
    Posts
    588
    Get the o2 bung welded for sure


    Sent from my iPhone 7 using Tapanutz
    Takegawa 181cc
    Finbro head
    Koso 34mm
    Yoshimura cam
    Aracer rc mini plus 2

  3. #3
    Senior Member
    is gearing up for winter
     

    Member #
    6726
    Join Date
    Dec 2015
    Posts
    1,927
    You could run a PCV/WB2 in the stock head spot, but you'd need the adapter from dobek (or your own made). As a temporary solution, id do this, but get a bung for long term.

    I picked up a PLX WB gauge for something else and when reading it i saw a suggestion of 24" from the head. Ive seen minimums on others, but generally its 8-12".

    Anyway, if youre going for peak power, youre going to want to mess with the timing too, so a bazzaz is probably out of the question. Depending on your experience, you could go for a full ECU replacement (with an aracer or apitech or something) too. Again, full customizability, similar to a PCV/WB2, but they normally arent as user friendly.

  4. Remove Advertisements
    HondaGrom.net
    Advertisements
     

  5. #4
    Senior Member
    is bbk woohoo!
     
    humilde_s13's Avatar
    Member #
    1400
    Join Date
    Sep 2013
    Location
    Virginia
    Odometer
    13500
    Posts
    588
    Aracer is what I run


    #Aracer rc mini plus 2 #Takegawa 181cc #finbro 125cc head #yoshimura cam #koso 34mm tb #finbro 6 hole injector #brocks exhaust
    Takegawa 181cc
    Finbro head
    Koso 34mm
    Yoshimura cam
    Aracer rc mini plus 2

  6. #5
    Senior Member
    is gearing up for winter
     

    Member #
    6726
    Join Date
    Dec 2015
    Posts
    1,927
    your signature still says api tech.

  7. #6
    Junior Member
    This user has no status.
     

    Member #
    6739
    Join Date
    Dec 2015
    Posts
    5
    Thanks for the speedy responses. Hopefully the local exhaust shop could assist me with the 02 bung welds.
    humilde_s13 likes this.

  8. #7
    Senior Member
    is bbk woohoo!
     
    humilde_s13's Avatar
    Member #
    1400
    Join Date
    Sep 2013
    Location
    Virginia
    Odometer
    13500
    Posts
    588
    Quote Originally Posted by turpinator View Post
    your signature still says api tech.
    Thanks have to change that


    #Aracer rc mini plus 2 #Takegawa 181cc #finbro 125cc head #yoshimura cam #koso 34mm tb #finbro 6 hole injector #brocks exhaust
    Takegawa 181cc
    Finbro head
    Koso 34mm
    Yoshimura cam
    Aracer rc mini plus 2

  9. #8
    Senior Member
    This user has no status.
     

    Member #
    6719
    Join Date
    Dec 2015
    Posts
    1,436
    no plans to do big bore.... finbro ecu. Uses stock O2 sensor and should do great with the pcx injector with your mods.

  10. #9
    Junior Member
    This user has no status.
     

    Member #
    6739
    Join Date
    Dec 2015
    Posts
    5
    I looked into the finbro ECU but wont lose some of the stock ecu functions?

  11. #10
    Senior Member
    is bbk woohoo!
     
    humilde_s13's Avatar
    Member #
    1400
    Join Date
    Sep 2013
    Location
    Virginia
    Odometer
    13500
    Posts
    588

    fuel controller advice

    Quote Originally Posted by Teething View Post
    I looked into the finbro ECU but wont lose some of the stock ecu functions?
    You loose some of the features but since you are in NC dont think you will have much a problem with cold start. There's a fix for that anyways.


    #Aracer rc mini plus 2 #Takegawa 181cc #finbro 125cc head #yoshimura cam #koso 34mm tb #finbro 6 hole injector #brocks exhaust
    Last edited by humilde_s13; 01-10-2017 at 08:57 AM.
    Takegawa 181cc
    Finbro head
    Koso 34mm
    Yoshimura cam
    Aracer rc mini plus 2

Page 1 of 4 1 2 3 ... LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Fuel controller
    By tommyboy in forum Parts for Sale / Wanted
    Replies: 1
    Last Post: 07-14-2015, 02:48 PM
  2. Confused about what Fuel Controller to get.... Any advice?
    By KoreaMSX in forum Grom Performance
    Replies: 11
    Last Post: 05-25-2015, 09:53 AM
  3. Replies: 32
    Last Post: 09-30-2014, 04:04 PM
  4. Which fuel controller?
    By gromrevver in forum Grom Performance
    Replies: 18
    Last Post: 02-27-2014, 04:38 PM
  5. Need Fuel Controller Help
    By Bf519 in forum Grom Performance
    Replies: 11
    Last Post: 12-03-2013, 02:12 AM

Tags for this Thread